Two-part pressure cell for air lifters for aquarium
This low-maintenance pressure cell fits on tubes with an outside diameter of 16 mm
- quiet operation
- uniform support up to 250 l/h
- low maintenance, easy cleaning
- Suitable for mat filters, sponge filters, biofilters, plant engineering
- easy installation: just mount the tube, 90° arch and an outlet tube, connect the air hose (4/6 mm) & diaphragm pump
The pressure cans always have the same defined diameter in the opening. In contrast, the diameter of commercially available riser tubes on which the drive parts are to be mounted varies minimally depending on the manufacturer or batch. As a result, it can happen that the pressure sockets are either too loose or difficult to fit. In the first case, it helps to wrap the riser tube with a little Teflon tape to fix the pressure can reversibly. If the tube is a little too thick, you can sand it down a little.
Product safety information
Manufacturer information:
Beck Roland & Markus Harich GbR
Schopflocher Str. 18A
Dürrwangen, Deutschland, 91602
info@luftheber-shop.de
| Shipping weight: |
0,01 kg
|
| Item weight: |
0,01 kg
|
